Pick
from our wide range of cylindrical grinders. Each
model is different to suit individual production
need. For higher productivity and greater profit,
it is essential you pick a machine suitable for
you.
Workhead:
The workhead spindle
is made of nickel chrome EN-24 hardened and ground.
It runs in gunmental bush bearings. The drive to
the workhead spindle which has MT-3, is by a step
‘V’ pulley. The speed obtained through this pulley
can be reduced by another bigger size pulley provided
in the workhead housing. The workhead is built for
grinding operation both with stationary centre and
revolving spindle. Oil holes are provided for lubrication.
Wheelhead:
The rigid wheelhead
spindle is made of nickel chrome steel EN-24 hardened
and ground. It runs in white metal adjustable type
bush bearings. The drive to the wheelhead is transmitted
by two V-belts. Automatic wheelhead traverse in
cross direction is on precision hand-scrapped ‘V’
and flat guideways, and is hydro-mechanical type.
The spindle is tapered (5o) at the front
to receive the wheel flange. Oil holes are provided
for lubrication of the bearing surfaces. Rapid approach
is available in U-127 series and it is up to 40
mm.
Tailstock:
The tailstock
travels smoothly all along the length of table right
upto the workhead.
Hydraulic/Electrical
System:
All standard
equipments are used in both system.
Swivel
Table:
Table is arranged
to swivel for taper grinding. For fine connections
to be applied by the screw adjustment.
Internal
Grinding Attachment:
The hinged type
Internal Grinding Attachment with its independent
motor is conveniently located on the wheelhead.
It has fast grinding action and it can be quickly
swung into a grinding position. The work piece can
be externally and internally ground in one setting.
Taper hole can be ground by swivelling either workhead
or table.
There are so many standard and
special accessories that can be added to the machine
as per requirement.
Technical
Specifications:
